This site uses analytics cookiesWith your consent we use Google Analytics to understand traffic and improve the site. Declining does not affect any feature.Privacy Policy

HomeProductsMarine FiltersFJ-2010TM
2010TM-OR Fuel Filter Element 10 Micron for Racor 500FG10 Series
FJ-2010TM

2010TM-OR Fuel Filter Element 10 Micron for Racor 500FG10 Series

Marine FiltersCE / ISO 9001

2010TM-OR is a 10 micron fuel filter element with 98% water removal for the Racor 500 turbine series, 79 mm (3.1 in) in diameter, 69 mm (2.7 in) tall and 105 g. It fits 500FG10, 500FG1210, 500FG2410 and 75500FGX10 housings, runs 60 gph at a maximum 15 psi, and cross-references TP995, PF598-10, P552010, FS1208, FS20101, FS20102 and FD 807. An o-ring ships with it; the service interval is 10,000 miles or 500 hours.

$9.99/ unit · referenceMOQ：1 units
Qty
min 1 units
Tier Pricing (USD / unit)
QtyUnit Price
1+ units$9.99
10+ units🎯 Recommended$9.49
50+ units$8.49
100+ units$7.99

📋 Key Specs

Part Number2010TM-OR
Filter TypeFuel filter and water separator element, cartridge
Micron Rating10 micron, 98% water removal
Outer Diameter79 mm (3.1 in)
Overall Height69 mm (2.7 in)
Flow Rate60 gph maximum at 15 psi
Weight105 g
Service Interval10,000 miles or 500 hours
Contents1 filter element with o-ring
ApplicationRacor 500 turbine series 500FG10, 500FG1210, 500FG2410, 75500FGX10

❓ FAQ

Yes. The element is rated 10 micron with 98% water removal, sized 79 mm (3.1 in) in diameter and 69 mm (2.7 in) tall. It can be used as a primary filter or as the final stage ahead of the injection pump.

It fits the 10 micron 500 series turbine housings: 500FG10, 500FG1210, 500FG2410 and 75500FGX10. The 30 micron housings 500FG30, 500FG1230, 500FG2430 and 75500FGX30 take the 2010PM element.

Every 10,000 miles or 500 engine hours. On a boat the hours come round first, so log them. A sudden loss of power, a rising vacuum reading or visible water in the bowl all mean changing earlier.

It cross-references TP995, PF598-10, P552010, FS1208, FS20101, FS20102, CS5043, 25011443, RE11325, L2021F, FD 807, 861014, F53148 and 33208. Any of those numbers on the old element confirms the match.

Yes, one o-ring ships with each element. Fit the new ring rather than reusing the old one, because a compressed ring is the usual reason a bowl joint starts to weep after a filter change.

MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.

Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.

Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.

Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.

Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.

ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.

Description

Product Overview

2010TM-OR is a cartridge fuel filter and water separator element rated 10 micron with 98% water removal, sized 79 mm (3.1 in) in diameter and 69 mm (2.7 in) tall and weighing 105 g. It fits the Racor 500 turbine series housings 500FG10, 500FG1210, 500FG2410 and 75500FGX10, flows 60 gph at a maximum 15 psi, and is used either as the primary stage or as the final filter ahead of the injection pump. The service interval is 10,000 miles or 500 hours, and the o-ring comes with the element.

Key Features

10 micron media — fine enough to act as a final filter, which is where a coarse primary element alone leaves the pump and injectors exposed.
98% water removal — water is coalesced and dropped into the bowl instead of being carried through to the injection equipment.
End cap handle — a moulded grip on the top cap lets the element be lifted and seated by hand, so no tool goes near the media.
10,000 mile or 500 hour interval — a defined replacement rhythm, which matters on a boat where the engine hours are the only real measure of use.
60 gph at 15 psi — the flow and pressure rating match the 500 series housings listed for this element.

Cross Reference

Element numbers — TP995, PF598-10, P552010, FS1208
Other references — FS20101, FS20102, CS5043, 25011443, RE11325, L2021F, FD 807, 861014, F53148, 33208
Housings — 500FG10, 500FG1210, 500FG2410, 75500FGX10

Specifications

Part Number — 2010TM-OR
Filter Type — Fuel filter and water separator element, cartridge
Micron Rating — 10 micron, 98% water removal
Outer Diameter — 79 mm (3.1 in)
Overall Height — 69 mm (2.7 in)
Flow Rate — 60 gph maximum at 15 psi
Weight — 105 g
Service Interval — 10,000 miles or 500 hours
Contents — 1 filter element with o-ring
Application — Racor 500 turbine series 500FG10, 500FG1210, 500FG2410, 75500FGX10

Applications

Marine diesel — primary or final filtration on 500 series turbine housings
Generator sets — standby and prime power units running the same housings
Housing family — 500FG10, 500FG1210, 500FG2410, 75500FGX10
Service rhythm — every 10,000 miles or 500 engine hours
Install note — new o-ring, prime the housing, run for a few minutes and check the bowl joint for weep

📄 Downloads

🔗 Related Products