68157291AA Fuel Filter + Red Billet Housing Cap (Ram 6.7L)
Complete fuel filter kit for the 2011-2020 Ram 2500/3500/4500/5500 with the 6.7L Cummins turbo diesel. Includes the 68157291AA 3-micron water-separating element, a 6061-T6 red anodized aluminum housing cap that replaces the 68065612AA plastic cap, and a new seal. Uses the same 1-1/4 inch (32mm) hex as the factory cap.
| Tier Pricing (USD / unit) | |
|---|---|
| Qty | Unit Price |
| 1+ units | $43.99 |
| 10+ units🎯 Recommended | $39.59 |
| 50+ units | $36.07 |
| 100+ units | $32.99 |
📋 Key Specs
| Filter element | 68157291AA — 3 micron, water-separating |
| Housing cap | Replaces 68065612AA, red anodized aluminum |
| Cap material | 6061-T6 aluminum, red anodized |
| Hex drive | 1-1/4 inch (32mm), same as factory |
| Kit contents | Filter element + red aluminum cap + new O-ring |
| Fitment | 2011-2020 Ram 2500/3500/4500/5500, 6.7L Cummins turbo diesel |
| Service interval | 15,000 miles (24,000 km) or 12 months |
❓ FAQ
Follow the Ram maintenance schedule: replace it every 15,000 miles (24,000 km) or 12 months, whichever comes first. Drain the housing at each service using the yellow drain lever.
Yes. All 2011-2020 Ram 2500, 3500, 4500 and 5500 trucks with the 6.7L Cummins turbo diesel use the same front fuel filter housing, including dually versions.
It means the media captures 99.9% of particles 3 microns and larger. Trapping smaller particles reduces wear on the high-pressure fuel pump and injectors.
Yes. The red anodized cap uses a 1-1/4 inch (32mm) hex, the same size as the factory cap, so your current socket or wrench fits. Tighten hand-tight plus 1/4 turn, about 18-22 ft-lb.
Yes. The 6061-T6 red anodized aluminum cap is a direct replacement for 68065612AA. This is a complete kit: the 68157291AA filter element and a new O-ring are included.
Description
Complete fuel filter and housing cap kit
This kit pairs the 68157291AA 3-micron water-separating filter element with a machined 6061-T6 red anodized aluminum housing cap that replaces the factory 68065612AA plastic cap, plus a new seal. It fits 2011-2020 Ram 2500, 3500, 4500 and 5500 trucks with the 6.7L Cummins turbo diesel. The aluminum cap is a direct replacement: same hex size as the factory part.
Construction
- Filter element: 68157291AA, 3 micron, water-separating media
- Filtration efficiency: captures 99.9% of particles 3 micron and larger
- Housing cap: 6061-T6 aluminum, red anodized, machined from billet
- Hex drive: 1-1/4 inch (32mm), identical to the factory cap
- Seal: new O-ring included
Cross-reference
- Filter element: 68157291AA
- Housing cap: replaces 68065612AA
Fitment
- Ram 2500 — 6.7L Cummins turbo diesel — 2011-2020
- Ram 3500 — 6.7L Cummins turbo diesel — 2011-2020
- Ram 4500 / 5500 — 6.7L Cummins turbo diesel — 2011-2020
Service interval
Follow the Ram maintenance schedule: replace the fuel filter every 15,000 miles (24,000 km) or 12 months, whichever comes first. Drain the housing at every service using the yellow drain lever.
Installation notes
- Place a drain pan under the chassis-mounted housing on the driver-side frame rail.
- Open the water drain valve (yellow lever) and drain the housing.
- Use a 1-1/4 inch socket or 32mm wrench to remove the old cap.
- Remove the old element, then wipe the housing interior with a lint-free cloth.
- Fit the new 68157291AA element.
- Lubricate the new O-ring with clean diesel fuel.
- Install the aluminum cap, hand-tighten, then turn 1/4 turn (18-22 ft-lb).
- Cycle the key to Run without starting 3 times to prime the system.
- Start the engine and check for leaks.
What is in the box
1 x 68157291AA filter element, 1 x 6061-T6 red anodized aluminum housing cap, 1 x new O-ring.
