Oil Filter W 712/4 3/4-16 UNF for Deutz 2011, Liebherr — 76 mm
Spin-on oil filter KO11001, 76 mm outside diameter, 3/4-16 UNF thread. Cross-references MANN W 712/4, Deutz 1174416, Fiat 74434794 and Toyota 90915-33021. Gasket 62 mm inside by 71 mm outside. Fits Deutz 2011 engines in pavers, wheel loaders and skid steers, and compressor units listing W 712/4.
📋 Key Specs
| Part Number | KO11001 |
| Filter Type | Spin-on oil filter |
| Outer Diameter | 76 mm |
| Thread Size | 3/4-16 UNF |
| Seal | Gasket 62 x 71 mm |
| Bypass Valve | 2.5 bar |
| Media | Pleated cellulose |
| Packaging | 1 piece |
❓ FAQ
Yes. KO11001 matches W 712/4 on 76 mm outside diameter, 3/4-16 UNF thread and the 62 x 71 mm gasket, and both are supplied with the seal. Height is not published here because the sources differ by more than a millimetre for this reference.
One catalogue gives 80 mm, MANN gives 93 mm for W 712/4, a 13 mm spread. Rather than publish a figure that could be wrong, the page states the diameter, the thread and the gasket, which are the three that decide the fit. Measure the old can if height matters on your machine.
Yes, on units that list MANN W 712/4. That reference covers a large number of CompAir, Kaeser and Ingersoll Rand compressors, where the same can is used as the oil filter.
KO70027 is also listed against W 712/4 and shares the 76 mm diameter and 3/4-16 UNF thread, but the catalogue figures for the two differ on height. Both pages publish the same diameter and thread, so confirm by the number on the old filter rather than by the can size.
Yes. It is a spin-on can with a 2.5 bar bypass valve and an anti-drainback valve, so it can replace the original can without any change to the housing.
MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.
Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.
Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.
Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.
Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.
ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.
Description
Product Overview
KO11001 is a 76 mm spin-on oil filter threaded 3/4-16 UNF, cross-referencing MANN W 712/4, Deutz 1174416 and Fiat 74434794. The 62 x 71 mm gasket and the thread together decide the fit; the can height differs between the sources for this reference, so no height is published.
